home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.20000217-20000824
/
000296_news@columbia.edu _Fri May 12 17:37:39 2000.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Return-Path: <news@columbia.edu>
Received: from watsun.cc.columbia.edu (watsun.cc.columbia.edu [128.59.39.2])
by fozimane.cc.columbia.edu (8.9.3/8.9.3) with ESMTP id RAA15963
for <kermit.misc@cpunix.cc.columbia.edu>; Fri, 12 May 2000 17:37:38 -0400 (EDT)
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.59.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id RAA28360
for <kermit.misc@watsun.cc.columbia.edu>; Fri, 12 May 2000 17:37:37 -0400 (EDT)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.9.3/8.9.3) id RAA08554
for kermit.misc@watsun.cc.columbia.edu; Fri, 12 May 2000 17:30:31 -0400 (EDT)
X-Authentication-Warning: newsmaster.cc.columbia.edu: news set sender to <news> using -f
From: twod@my-deja.com
Subject: Paging : Getting USR Sportster to hangup
Date: Fri, 12 May 2000 21:24:13 GMT
Organization: Deja.com - Before you buy.
Message-ID: <8fhspd$rm5$1@nnrp1.deja.com>
To: kermit.misc@columbia.edu
I have installed the RPM version C-Kermit 7.0.196 (d/l from
www.columbia.edu/kermit) onto my linux-mandrake box.
I am trying to page a numeric pager and am using the numpage script from
the C-Kermit Scripts library.
All goes well, except for the fact that my external USR sportster 56K
modem does not hangup the line after the call. The modem type is set to
usr.
Switching debug on, everything looks OK to me.
Checking the FAQ, I find Q13 - Why Doesn't the HANGUP Command Work for
Me?
So, I have double checked the DIP switches on the modem and DTR is set
to normal.
During debug mode I see the AT commands as they are being sent to the
modem and do not see '&D2'.
I then tried to use output{} to send the &D2, but get an error saying
the port is not yet open - I placed this just above pdial, which is
perhaps the prblem here.
I then tried to reset the init string using a set command, but this
seemed to be ignored.
What is the easiest way in which to add AT commands to the modem init
string ?
TIA
IAP
Sent via Deja.com http://www.deja.com/
Before you buy.